Representative packaging and application images. Confirm the exact grade, label and finish with TXJ.
TJ5503W High-Toughness Engineering Resin White
TJ5503W · Engineering Resins
A white engineering resin for prototype housings, jigs and fixtures, with 82D hardness and no more than 0.5% listed shrinkage.
Choose a listed color, then confirm availability when requesting a quotation.
Supply & Shipping
Share your order quantity, packaging needs and destination. MOQ, lead time and shipping terms are confirmed in your quotation.
Technical Documents & Compatibility
Listed wavelength: 365-405nm. Request exposure and post-curing settings for your printer and layer height.
Request TDS / SDS →TJ5503W High-Toughness Engineering Resin White
BASIC INFORMATION
TJ5503W is intended for fit checks, prototype verification and tooling development. Compare its white appearance, 47 MPa tensile strength and 48% elongation at break with the needs of your engineering project.
Recommended evaluation uses: Prototype housings, tooling jigs, fixtures and fit-check parts.
- Brand
- TXJ
- Product
- TJ5503W High-Toughness Engineering Resin White
- Material Family
- Engineering Resins
- Packaging
- Bottle & bulk options on request
Key Features and Uses
Low listed shrinkage
No more than 0.5% shrinkage in the supplied product data.
Suggested Applications
Prototype housings, tooling jigs, fixtures and fit-check parts.
Printing Workflow
Listed wavelength: 365-405nm. Confirm exposure settings with a calibration print.
Product Gallery
Representative packaging and printed-model examples. Images do not establish grade-specific performance.
View full image ↗
View full image ↗Technical Specifications
Use these listed values to compare grades. Request the current TDS for test methods and any data marked on request.
| Product Model | TJ5503W |
|---|---|
| Hardness / Viscosity at 25°C | 82D Shore; 900-950 cps |
| Liquid Density / Shrinkage | 1.13 g/cm³; ≤0.5% |
| Flexural Strength / Modulus | 67 MPa; 1462 MPa |
| Tensile Strength / Modulus | 47 MPa; 2269 MPa |
| Elongation at Break / Impact Strength | 48%; 38 J/m |
| HDT at 0.45 MPa | 50°C |
| Wavelength / Curing Time | 365-405nm; On request |
Results depend on printing and post-curing conditions. Unlisted test values require confirmation. Heat-exposure claims and HDT measurements describe different test conditions.
Technical Documents
Color Options
Listed colors: White. Confirm availability and finished-part appearance with a sample.
Displayed colors indicate inquiry preferences. They do not represent confirmed inventory or guaranteed finished-part color.
Frequently Asked Questions
Material selection, printing workflows and wholesale sourcing.
Ask Our Team →Is this resin compatible with my printer?
TJ5503W lists a wavelength of 365-405nm. Send your printer model, light source and layer height so TXJ can advise on an evaluation workflow. Validate settings with a calibration print.
Can I request a sample before a bulk order?
Ask about TJ5503W sample availability before a bulk purchase. Share your application, chosen color and destination so TXJ can confirm the available quantity and shipping terms.
Where can I download the TDS and SDS?
Request the current TJ5503W TDS and SDS through the inquiry form. Confirm the revision, test method and post-curing conditions. Values missing from this page are not estimated test results.
Do you support OEM packaging and bulk purchasing?
Discuss TJ5503W order quantity, packaging size and labeling requirements with TXJ. MOQ, lead time, OEM options and commercial terms are confirmed in a quotation.
How do I confirm mechanical properties?
Compare the TJ5503W specification with your part requirements, then test representative prints using the agreed post-curing process. Suggested applications are starting points for qualification, not certified end-use approvals.
Let's Find Your Resin Solution.
Tell us your printer, application, preferred color and expected order quantity.
